"widow" <black_widow1234@hotmail.com> wrote in
news:1148552996.183447.310030@y43g2000cwc.googlegr oups.com:

> hi there took dashboard out to check the bulb(no bulb)put one in and
> thought "yes" its working!!light comes on for the two secs it should do
> but then i drove for about 100 yards and it came back on and stayed
> on!!!so still not solved the problem,had the car throught two previous
> MOTS and passed,previous owner must have had problems,any advice,do i
> need to get codes and if so how do i get them?
>
>



Aha! Roger the Bodger tried to cover up an ABS problem by removing the bulb
before unloading the car on you! How sweet.

If the light came on once the car was in motion, you need to check the
sensors at the wheels. They get rusted and/or damaged. Inspect the wire to
each sensor as well.

Since you're in Britain (land of perpetual rain), it's probable rust has
built up on the toothed wheels, and this rust has fouled one of the
sensors.





--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/