View Single Post
  #4 (permalink)  
Old 18 Feb 2006, 12:40 pm
'Curly Q. Links'
Guest
 
Posts: n/a
Default Re: 94 accord tilt wheel

wwatson3@insight.rr.com wrote:
>
> thank you.. i think a trip to the library is in order..I think they
> have chiltons repair books there...I saw the sight you recommended, but
> it sounded a bit complex for what I needed to get done..
>
> Thank you again..
>
> Bill


-------------------

Sorry, I didn't realize the TSB didn't tell you how the covers come off.
:-(

Here's a link to a PDF that shows the installation of the alarm system
in a '97 CR-V. Removing the covers is explained.

http://www.hondasuv.com/pdf/crv/firs...ritysystem.pdf

On your Accord (and most Hondas of that era) there's a long bolt that
goes thru the hinge point of the steering column. The big adjustment
lever you're talking about has the 'nut' welded on it. You need to go to
the other end of the bolt and tighten it up. About 1/2 turn will
probably snug it up. You'll see it has white paint on it as a LOCK. Use
contact cement or paint to re-lock it when you're done.

The Chilton's manual for your Accord would be a good investment, and
very interesting reading too.

'Curly'
Reply With Quote