TeGGeR® wrote:
> Dufus Systems <peon@somecompany.com.invalid> wrote in
> news:Xns976C5D9A0ACADpeonsomecompanycomin@127.0.0. 1:
>
> > BigELilE05@msn.com wrote in news:1140095094.731514.21250
> > @g47g2000cwa.googlegroups.com:
> >
> > 'Curly'
> >>
> >> It's not the CV joints, it's the tie-rod and tie-rod end on the
> >> drivers side. I looked at teggers site and it doesn't go into the
> >> tie-rod.
> >>
> >> I know I can get the outter one loose and replaced, I'm just not sure
> >> about the inner part. If I gotta buy some special tools and it's a
> >> big PIA, I will just have to take it to someone, but I would rather
> >> do it myself.
> >>
> >>
> >
> > If you're just replacing the tie rod end, then it simply unscrews from
> > the shaft
>
>
>
> "Simply"...*IF* you don't live in the Rust Belt...
Florida.

Do I need a special tool to remove and replace the metal clamp on the
boot?
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/