Dufus Systems <peon@somecompany.com.invalid> wrote in
news:Xns976C5D9A0ACADpeonsomecompanycomin@127.0.0. 1:

> BigELilE05@msn.com wrote in news:1140095094.731514.21250
> @g47g2000cwa.googlegroups.com:
>
> 'Curly'
>>
>> It's not the CV joints, it's the tie-rod and tie-rod end on the
>> drivers side. I looked at teggers site and it doesn't go into the
>> tie-rod.
>>
>> I know I can get the outter one loose and replaced, I'm just not sure
>> about the inner part. If I gotta buy some special tools and it's a
>> big PIA, I will just have to take it to someone, but I would rather
>> do it myself.
>>
>>
>
> If you're just replacing the tie rod end, then it simply unscrews from
> the shaft



"Simply"...*IF* you don't live in the Rust Belt...


--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/