m <matt_the_brat_remove_to_mail@hotmail.com> wrote in
news:Xns96CF536FDAD88mattthebrathotmailco@207.35.1 77.134:

> Took the wheel off, pads off, rotor off. spin the hub by hand - no
> play, no noise. put the rotor and pads back on, and sure enough -
> there's a slight warp in the rotor. pisses me off too, I just
> replaced them. Here i thought Brembo was pretty good.


Have you sanded off **ALL** the rust on the hub and the rotor's backside?
Are you **100% certain** you don't have a piece of grit between the rotor
and hub? Both the above will cause runout and will be mistaken for warped
rotors.

Also, you need to make 100% certain the pins are sliding freely and the
pads are floating unimpeded.
http://www.tegger.com/hondafaq/rustybrakes/brakes1.html
(Takes a while to load. Pics are big)



--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/