TomP wrote:
> Interesting, I was told the '90 Integra bushings were a bastard size all unto
> themselves...

not sure if there's anything different about the 90 specifically, but
for all others, i can confirm that they're not. i have civic and
integra bushings and they're identical sizes.

>
> TeGGeR, have you actually test fit this bushing to a '90 Integra?
>
> Cheers, Tom
>
> "TeGGeR®" wrote:
>
>
>>I'm posting this in case anyone Googles for this in the future. The part
>>number is
>>52385-SK7-N02
>>
>>This is the big main bushing for the '90-'93 Integra. It is the same for
>>right or left and presses into the existing trailing arm. It cost me about
>>$75 Cdn each, versus over $300 for the whole trailing arm itself (which
>>contains the bushing).
>>
>>That part itself does not come up on the dealer's software, but the NUMBER
>>is identified as "bushing, right rear". The number may also not come up in
>>on-line parts searches. This unit may have been produced as part of a
>>recall similar to that issued for contemporary Civics.
>>
>>The "SK7" portion of the part number identifies the part as being specific
>>to the '90-'93 Integra. The '94-'97 Integra is "ST7", so this bushing may
>>not fit that model.
>>
>>--
>>TeGGeR®
>>
>>The Unofficial Honda/Acura FAQ
>>www.tegger.com/hondafaq/
>
>
> --
> Tp,
>
> -------- __o
> ----- -\<. -------- __o
> --- ( )/ ( ) ---- -\<.
> -------------------- ( )/ ( )
> -----------------------------------------
>
> No Lawsuit Ever Fixed A Moron...
>
>