Interesting, I was told the '90 Integra bushings were a bastard size all unto
themselves...

TeGGeR, have you actually test fit this bushing to a '90 Integra?

Cheers, Tom

"TeGGeR®" wrote:

> I'm posting this in case anyone Googles for this in the future. The part
> number is
> 52385-SK7-N02
>
> This is the big main bushing for the '90-'93 Integra. It is the same for
> right or left and presses into the existing trailing arm. It cost me about
> $75 Cdn each, versus over $300 for the whole trailing arm itself (which
> contains the bushing).
>
> That part itself does not come up on the dealer's software, but the NUMBER
> is identified as "bushing, right rear". The number may also not come up in
> on-line parts searches. This unit may have been produced as part of a
> recall similar to that issued for contemporary Civics.
>
> The "SK7" portion of the part number identifies the part as being specific
> to the '90-'93 Integra. The '94-'97 Integra is "ST7", so this bushing may
> not fit that model.
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/

--
Tp,

-------- __o
----- -\<. -------- __o
--- ( )/ ( ) ---- -\<.
-------------------- ( )/ ( )
-----------------------------------------

No Lawsuit Ever Fixed A Moron...