> If you are refering to using the lock/unlock button on the driver's
> master switch or passenger switch, then the switch contacts are dirty.
> You can carefully take them apart and clean off the carbon dust on the
> metal rockers inside each switch. I wouldn't suggest this operation
> unless you are confident in your DIY abilities. They are not made to
> be disassembled -- atleast intuitively and conveniently so...

Ok, I'll try to clean those. I wonder if some contact cleaner would
work? I have tons of that stuff.

> If you are refering to operating the locks with the key in the driver's
> door lock, I think that that was only an option for the Accord wagons
> of the 1990-1993 body style.

We can lock the doors using the key, that is fine. One of the locks -
rear passenger side - wasn't always working but it's fine now.

If one of the door locks doesn't move when the doors open, is it a pain
to replace the actuator? I'm not worried about this, I check that door
and make sure it's locked if I've opened it.