View Single Post
  #8 (permalink)  
Old 21 Jun 2005, 06:28 pm
TeGGeR®
Guest
 
Posts: n/a
Default Re: Loose caliper on Integra?

"RkFast" <rkfast@nospam.com> wrote in news:b1Mte.2436$Q05.605@fe08.lga:

> 95 Teg LS....
>
> Did a complete brake job, including two new rear calipers (old ones
> were binding up pretty good). About a month after I finished the job,
> I'm hearing a pretty loud knocking from the rear when going slow over
> bumps. Noise goes away when I depress brake pedal or pull on e-brake
> handle a few clicks. So I dive underneath and start pulling on things
> to see what's loose. Get to the calipers and when I pulled on them by
> the brake hose boss and giggle, they deflect a good 1/8 -1/4 of an
> inch back and forth!



And "back and forth" is what? Left to right relative to the car, or front-
to-back relative to the car?

This is important, as it means different problems.


--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Reply With Quote