B-Nut wrote:
> I have a 1988 honda accord dx 5 spd manual carb. I replaced the driver side
> strut and coil spring. but as I began the job, I noticed i had a broken
> bolt that connects the lower control arm to the damper fork. I bought a
> replacment bolt, nut, and bushing. But my problem is how do i get the
> bushing out of the control arm to install the new one? Is there a special
> tool I need? somebody give me some direction to follow.
>
>
bearing press. but if you broke the bolt, can't you just replace the
bolt, not the bushing?