On 5/18/05 7:39 AM, in article
1116419971.733055.307270@f14g2000cwb.googlegroups. com, "butch burton"
<spacetrax@wi.rr.com> wrote:

> Just had a radiator replaced in a 97 accord - the first replacement
> radiator leaked - Modine made in Mexico and now I discovered the
> replacement is leaking around the drain cock or through the drain cock.
> The plastic valve in the drain cock was fairly loose. Is finger tight
> enough and is there anything you can do to keep these things from
> leaking.
>
> I think the mechanic - who was in a big hurry to get the job finished
> just did not tighten the thing.
>
> Any input would be appreciated.
>
> thanks
>

It should be snug, but its not supposed to be super tight, the rubber o-ring
is what makes the seal. Check your local car parts store for a replacement
o-ring or just get a new plug, they're only a couple dollars.