View Single Post
  #1 (permalink)  
Old 12 May 2005, 04:45 pm
punkyw
Guest
 
Posts: n/a
Default Crankshaft pulley turns but not cam

My daughter was driving her 88' accord and when she stopped in the
driveway, it would not start later. When cranking it, it sounded like the
timing belt had broke. I pulled off the cam cover and the belt was still
in place. When I cranked the engine the crankshaft turned, but not the
cam. I tried turning the cam with a socket,but had no luck. I pulled the
gasket cover but could not see anything out of place with the valve
springs, etc. Any ideas what is going on?

Reply With Quote