View Single Post
  #2 (permalink)  
Old 09 Mar 2005, 01:51 pm
Michael Pardee
Guest
 
Posts: n/a
Default Re: Engine wiring Acura 1.6EL, US Civic EX (D16Y8) diffs betw 1997 and 1998

<M5> wrote in message news1fu211j3r2p8ju1euo152nde951joj6mk@4ax.com...
> My 1997 Acura 1.6EL died at 119,000 km after the crankshaft bearings
> disintegrated. No, I didn't neglect the oil changes - somehow a leak
> developed where oil was consumed (without dropping on the ground) and
> antifreeze got in, corroding the bearings. At least, that's the guess
> of my mechanic.
>
> This car has the D16Y8 engine also found in the 96-00 US Civic EX
> sedans. It lived it's life in Toronto, Ontario.
>
> I needed to make the car serviceable again, so I found a 1998 1.6EL
> engine at a scrapyard. My mechanic has installed it, except for one
> wire that has a different connector to the one on the intake manifold.
>
> He says the car starts, but idles at 1500 instead of 800, and runs
> rough.
>
> 1) Does anyone have any knowledge about differences between these two
> model years that will help complete the installation? Maybe wiring
> diagrams, or any other differences so that we can avoid any gotchas?
> (don't want the kids to be in danger). Any experience with this
> problem?
>
> 2) There was significant black at the exhaust due to oil consumption.
> Do I need to replace muffler, catalytic converter, pipes also?
>
>

Don't know about the manifold, but if the O2 sensor or catalytic have been
damaged by oil the "check engine" light will let you know. As for the
muffler and pipes (the plain 'ol metal stuff) they'll be fine, but maybe
smoky the first few miles.

Mike


Reply With Quote