Thanks for the info 'Teg... It'll be until next weekend that I get a
chance to replace my coolant, so I'll post back then.

Regards,
-Jamie
TeGGer® wrote:
> Not usually necessary.
>
> After you refill the system using the bleed screw (make sure the
heater is
> turned to FULL HOT), start the engine, then bounce the bumper and
squeeze
> the upper hose once in a while. The level will blip down as bubbles
are
> ejected.
>
> Once it stops going down but keeps rising, put the cap back, make
sure the
> reservoir is full, then drive the car around until the temp gauge
reads
> full-hot.