"R. P." wrote:
>
> "Randolph" <trash@junkmail.com> wrote:
> > I have no particular knowledge of the '94 Accord, but I would think
> > the
> > least painful would be to remove the stereo and tap into the wiring
> > harness that plugs in at the back of the stereo.

> I do have the '94 Accord service manual and using that I've already
> replaced the radio once, so I know how to do it. However, I'm not sure
> the best place is at that wiring harness to make the splice for the
> toggle switch. Oh, and yes, you're right about the color coding of the
> antenna trigger wire: it is YEL/WHT at the antenna end. WHT/BLU is for
> the constant battery voltage there.

If you put in an after-market stereo, you probably used an adapter
harness that plugs in between the stereo and the original plug on the
car wiring harness. If so, I would splice the toggle switch into this
adapter harness.