"Randolph" <trash@junkmail.com> wrote:
> I have no particular knowledge of the '94 Accord, but I would think
> the
> least painful would be to remove the stereo and tap into the wiring
> harness that plugs in at the back of the stereo.
>
> http://tinyurl.com/3wh3a (leads to http://www.installdr.com) will tell
> you how to remove the stereo. It also says the wire is brown with
> white
> stripe, same as right rear speaker negative. I believe this is wrong,
> the factory manual says YEL/WHT for the antenna trigger (and BRN/WHT
> for
> the right rear speaker negative).

I do have the '94 Accord service manual and using that I've already
replaced the radio once, so I know how to do it. However, I'm not sure
the best place is at that wiring harness to make the splice for the
toggle switch. Oh, and yes, you're right about the color coding of the
antenna trigger wire: it is YEL/WHT at the antenna end. WHT/BLU is for
the constant battery voltage there.

Rudy